How To Reset Blink Camera To Factory Settings. The blink mini reset button is located on the bottom, next to where the stand connects. After pressing sync for 15 seconds, the blue led turns on for a second and turns off.
After changing the router, i need to restore the camera to factory settings but the information you make available at the internet doesn't seem correct. A hard reset will revert your blink camera to its original factory settings. I tried to resync the camera, by bringing it indoors and setting it next to the modem.
In Fact, Blink Cameras Are Designed So That They Cannot Be Reset To Factory Settings.
If you can’t log in to the device. If you are using a blink mini camera, you can find the reset button at the bottom of the camera. For instructions on how to do a full factory reset of your sync module, contact customer service.
All Other Blink Cameras Have The Reset Button Located In The Battery Compartment.
The mini camera serial number is just below the qr. I tried to resync the camera, by bringing it indoors and setting it next to the modem. Additionally, some models offer a reset of certain settings on the camera.
Insert A Paperclip Or Thin Item Into The Opening And Press Lightly Until You Feel A Click.
A red and blue lights will flash rapidly shortly before the button is released. If you encounter a problem while registering the device to the mydlink service. To reset a blink camera, you need to reset the sync module and this can be done by holding down the reset button on the module’s side.
After The Light Turns Red, Reinstall The Sync Module In The Blink App.
If you change your network environment. In fact, blink cameras are designed so that they cannot be reset to factory settings. If you want to assign the device to another mydlink account.
Additionally, Some Models Offer A Reset Of Certain Settings On The Camera.
To reset a blink mini camera, press and hold the reset button at the bottom of the camera. Press and hold the light button until the leds on the back blink red. After the light turns red, reinstall the sync module in the blink app.